Call  (800) 338-1002

info@taccinc.com

   
larsens_manufacturing FIRE EXTINGUISHER CABINETS

  Up ] [ Vista ] Cameo ] Medallion ] Rota ] Occult ] Gemini ] Architectural ]
Home
AJ Wash
Arkansas Lamp
Bed Frames
Bobrick
Broan
Brownlee Lighting
Cendrex
Classic Coffee Concepts
Crescent Shower Rods
DaLite
Don-Jo
Door Hardware
Eder Flag
Elco Lighting
Ex-Cell
Hager Hardware
JERDON
Incon Lighting
Larsen's
Lodging_Star
LPC Lighting
LucaseyTV Mounts
Moen Donner
Mohawk Spec1
Pemko
Phones
Pressto Vallet
Progress Lighting
Protege
Rediframe
Request Catalog
Republic
SPECIALS
Stanley Doors
TCP Home
Technical Concepts
Timley
U.S. Archetectural Lighting
Wooden Mallet
Sunbeam
Login Page
Catalog2006
Seagull Lighting

VISTA SERIES
GENERAL DESCRIPTION: The Vista Series has the same aesthetic and practical features of the Cameo. The fire extinguisher is projected into a protruding bubble, allowing for full 180 degree visibility and for installation into a shallow wall depth (4"). The fire extinguisher is supported by the manufacturer's standard bracket. The unique Vista bubble door eliminates the need for a door frame.

BOX SPECIFICATION: Identical to the Architectural Series.

TRIM SPECIFICATION: Steel trims are one piece, constructed of cold-rolled steel with a standard finish of white baked acrylic enamel, which can be used as either a finish or prime coat. Aluminum trims are constructed of extruded aluminum with satin anodized finish. Clear anodized is standard, and a wide selection of optional color anodized finishes is available. All trim corners are mitered. To specify aluminum trim, use the prefix "AL" before the cabinet model number. Stainless steel trims are one piece, constructed of #4 finish, 304 stainless steel. To specify stainless steel trim, use the prefix "SS" before the cabinet model number.

DOOR SPECIFICATION: The Vista door is a frameless clear acrylic bubble with a chrome plated pull knob, magnetic catch, and continuous piano hinge which matches the trim material. The standard Vista bubble is clear acrylic and red acrylic is available as an option, if specified.

TO SPECIFY THE VISTA SERIES:

  1. Use the appropriate prefix for the trim material. If steel - no prefix is required. If aluminum - use "AL". If stainless steel - use "SS".
  2. Select the required model number from the table below.
  3. Indicate the optional red acrylic bubble (clear is standard).
Vista Series Cabinet
All recessed Vista cabinets comply with all ADA wall projection guidelines. surface-mounted vista cabinets' compliance with ADA wall projection guidelines depends on several location and installation issues. Please refer to the "introduction" profile.
Vista Series wall installation and trim projections
 

DIMENSIONS
  Model
Number
Trim Style
and
Projection
Inside Box
Dimensions
H x W x D
Outside Trim
Dimensions
H x W*
Rough
Opening
H x W x D
Recommended
Extinguisher
Capacity
  V-2709 Rec. 5/16 27 x 9½ x 4 30½ x 13 28 x 10½ x 4 MP2½,MP5,MP5-A,
MP6,MP10,DC2½,
DC5,DC6,DC10
FS V-2709 Rec. 5/16 27 x 9½ x 4 30½ x 13 293/8 x 117/8 x 4¾
  V-2709-SM Surface Mtd. 30½ x 13 x 4 30½ x 13 --
  V-3012 Rec. 5/16 30 x 12 x 4 33½ x 15½ 31 x 13 x 4 PW2½,MP20,
DC20
FS V-3012 Rec. 5/16 30 x 12 x 4 33½ x 15½ 323/8 x 143/8 x 43/8
  V-3012-SM Surface Mtd. 33½ x 15½ x 4 33½ x 15½ --

NOTE: "FS" models denote Larsen's "Flame-Shield" fire-rated cabinets. When specifying Larsen's "Flame-Shield" fire-rated cabinet option for the Vista Series, refer to the dimension chart on this page and select from the models with an "FS" prefix. For complete details of the "Flame-Shield" option.

* Deduct ¾" from H x W dimensions for cabinets with aluminum trim. This does not apply to cabinets with "Flame-Shield" fire-rated option.

                                        Up ] [ Vista ] Cameo ] Medallion ] Rota ] Occult ] Gemini ] Architectural ]