|
Strike
and Accessories
|
|
| Strikes |
|
Strikes
for use with 9860 vertical rod exit device
All strikes are black nylon coated |
 |
 |
 |
221
Standard for 9860. Applied to surface of
floor or to a flat threshold. Standard
packaging. |
227
Applied to surface of stop. No mortise
required. Standard packaging. |
233
Bottom strike. Alternate bottom strike.
Flush mounting stainless steel.
Furnished with expansion shields.
Requires mortise in the floor. |
|
|
| Strikes
for use with F9860 vertical rod fire rated exit device |
 |
|
245
Surface applied for F9860.
Standard packaging. |
233
Bottom strike for F9860.
Flush mounting stainless steel.
Furnished with expansion shields.
Required mortise in the floor.
Standard packaging. |
|
|
| Strike
for use with 9800 rim type exit device |
Strike
for use with F9800 rim fire exit device |
|
239
For 9800 surface applied
Standard Packaging. |
|
|
245
For F9800 surface applied,
Standard packaging. |
|
|
| Overlapping
Strike |
Additional
strikes |
 |
251
Surface applied. Used on inactive leaf
for device
on active leaf of pair of doors without
mullion. |
|
 |
 |
LFF
Lock front filler. |
SF
Strike filler. |
|
|
| Accessories |
|
Mullions
Lockable and electric
lockable mullions are available on request. |
|
|
418
Removable mullion Aluminum painted ( Prime
coat) includes top and bottom retainer
supplied as a stock 96" for non fire
rated applications. |
 |
|
|
|
424
Fire exit mullion. 2" x 3"
steel tubing round corner, iron construction
with iron top and bottom retainers. To
be used with two rim type devices on two
independent active doors with full double door
openings.
|
 |
|
|
| Additional
Rods - Vertical rod for 10
feet high doors available on non fire rated vertical
rod devices only. Use part # VRRD-10. |
|
| Glass
Bead Shim Kits |
801
- For rim type, 1/8" thick
806 - For vertical type, 1/8" thick
812 - For firerated vertical type, 1/8"
thick
When exit devices are used with shim kits with outside
trim, spindle length thumbpiece and thru bolt length
must be increased accordingly. |
|
| Cylinder
Dogging Kits |
 |
Prefix
"CD" before part#. Available
for all 9800 Series devices except fore exit
hardware. Cylinder dogging with a
mortise cylinder is located on the mounting
insert locks bolt in retracted position.
27" minimum door width is required.
To order kit
only us part# 36CYLD9800 for 36"
and 48CYLD9800 for 48" devices.
Specify finish.
|
|
