|
Alarm
Exit Hardware
|
|
|
|
| Rim
Type Exit Devices |
| ALRM
9800 EO36 |
Alarm
rim type 36" door ( panic grade ) |
| ALRM
9820 EO48 |
Alarm
rim type 48" door ( panic grade ) |
| FALRM
9800 EO36 |
Alarm
rim type 36" door ( fire grade ) |
| FALRM
9820 EO48 |
Alarm
rim type 48" door ( fire grade ) |
|
|
| Vertical
Rod Type Exit Devices |
- Prefix "Alrm"
before part#.
|
|
| Features |
- Alarm units have an
internal horn. When the push rail is
depressed, the horn sounds to provide an audible
means of signaling that the door has been opened
and violated.
- The unit has
changeable 2 minute alarm cutoff or manual reset.
Preset at factory for 2 minute alarm cut off.
Jumper cable is provided to switch to continuous
alarm.
- The key switch to
turn the alarm off is a standard 1-1/4"
cylinder with "C" keyway. The
alarm operates on one standard 9 volt transistor
battery. When battery is weak the horn will
emit an intermittent signal.
- Alarmed units are
supplied with two switches. One switch
monitors the push rail and the other switch
monitors the latchbolt for full proof security.
- Unit includes
"emergency exit only. Alarm will
sound" decal for application on door or unit.
|
|
| Finishes |
| Cal-Royal |
Description |
BHMA |
US
Finish |
Material |
| P |
Primecoat |
600 |
USP |
Steel |
| 3 |
Polished
Brass, Clear Powder Coat |
605 |
US3 |
Brass |
| 4 |
Satin
Brass, Clear Powder Coat |
606 |
US4 |
Brass |
| 9 |
Polished
Bright Bronze |
611 |
US9 |
Bronze |
| 10 |
Satin
Bronze Clear Powder Coat |
612 |
US10 |
Bronze |
| 10B |
Oiled
Rubbed Bronze |
613 |
US10B |
Bronze |
| 26 |
Polished
Bright Chrome |
625 |
US26 |
Brass |
| 26D |
Satin
Chrome |
626 |
US26D |
Brass |
| 32 |
Polished
Bright Stainless |
628 |
US32 |
Stainless
Steel |
| 32D |
Satin
Stainless |
630 |
US32D |
Stainless
Steel |
|
