8000 Series Exit Devices
F8000 Series Fire Exit Devices
ANSI 156.3 Grade 2, UL Listed 

8000 Series Specifications

• Material - Push bar painted heavy gauge steel, spring of stainless steel.
• Latch  Bolts - 3/4" throw, stainless steel.
• Dead Latch Bolt - 5/8" stainless steel.
• Strike - For 5/8" stop, plus shim for 1/2" stop.
• Projection - 2-1/2" maximum, 1-7/8" depressed
• Reversible - Non-handed.  Reversible for all functions and trims.
• For Door - 1-3/4" thick standard.  Specify if other than 1-3/4" thick.
• Backset - 2-3/4".
• 161 Cut Out - Device covers 161 cu out.  Some trims require cover plate.

• Packaging - Exit devices packed with lock front and stike filler.
• Sex Bolts - Standard packaging for use with wood, composite or non reinforced doors on vertical rod devices.
• Door Width - For door 2'6" to 3'0" wide - 3'0" standard; for door 3'0" to 4'0" wide - 4'0" standard
• Stile Height - 4-1/4" min.
• Mounting Height - 40-5/16" from CL to finished floor recommended.
• Mounting - Furnished standard with sheet metal & machine screws.
• Cylinder - Schlage "C" keyway, other keyways specify.
• Dogging - 1/4 turn, hex key dogging on non-fire-labeled devices.
• U.L. Listed - For panic hardware
• Operation - Inside by slight pressure on any point on the push bar at all times.
• Top Latchbolt - 3/4" throw, stainless steel.
• Top Deadbolt - 1/2" throw, steel bolt.
• Bottom Latchbolt - 3/4" throw, stainless steel.
• Door Height - For door up to 7'0" high - 7'0" standard.  For door up to 7'0" to 8'0" - 8'0" standard.